Adding An Expansion Card - Gateway E-1400 System Manual

Adding an expansion card

The E-1400 computer has three expansion slots on the riser card for PCI cards.
Important
To add a PCI expansion card:
1
Set any jumpers and switches on the card, if required in the card
instructions.
Important
2
Turn off the computer, disconnect the power cord, modem cord (if
installed), and all external peripheral devices.
3
Open the case, observing the static electricity precautions on page 15.
4
Remove the slot cover bracket by pressing downward and outward on
the tab.
Tab
The integrated video is automatically disabled if an add-in
video card is used.
Make sure the option ROMs on your add-in cards conform
to the Phoenix POST Memory Manager Specification,
Version 1.01 and BIOS Boot Specification, Version 1.01.
For additional information, refer to the following website:
http://www.phoenix.com.
Adding an expansion card
41