Adding or replacing an
expansion card
To add or replace an expansion card:
1
2
3
4
50
CHAPTER 4: Upgrading Your Computer
Remove the side panel by following the instructions in
"Opening and closing the case" on page
Remove the hard drive bracket and set it aside (as far as
the hard drive cables will allow).
Remove the front bezel by following the instructions in
"Removing and installing the front bezel" on page
If you are replacing an expansion card, disconnect any
cables that are attached to the card, noting their
locations and orientation. (You may need to reconnect
the cables after you install the new card.)
39.
40.