Gateway E-1000 Series Maintaining And Troubleshooting page 39

28 Maintaining and Troubleshooting Your E-1000 Series System
Set any jumpers and switches on the card, if required in the card's
1.
instructions.
Turn off the system and unplug the power supply cord.
2.
Remove the chassis cover, observing the "Static Electricity
3.
Precautions" on page 2.
Locate an available PCI or ISA/PCI (shared) slot.
4.
Remove and retain the screw securing the expansion port cover to the
5.
rear panel. Keep the port cover for reinstallation in case you ever need
to remove the card.
Firmly insert the edge of the expansion card into the slot.
6.
After seating the card firmly, secure it to the chassis by installing the
7.
screw you removed in step 5 through the mounting bracket at the end
of the card.
8. Attach cables according to the card's instructions.
Replace the case cover and turn on the system.
9.
To add an expansion card