22
Maintaining and Troubleshooting Your E-1000 Series System
Installing a drive in the 5.25-inch drive bay
The 5.25-inch drive bay may be used to install a disk drive, CD-ROM drive,
or other 5.25-inch device.
To install a drive in the 5.25-inch drive bay
Turn off the system and unplug the power supply cord.
1.
Remove the chassis cover and the front bezel, observing the "Static
2.
Electricity Precautions" on page 2.
Locate the 5.25-inch drive mounting bracket unit containing the
3.
CD-ROM.
Remove the data and power cables from the back of the drive, and
4.
unplug the CD audio cable from the CD audio-in connector on the
system board (see "System Board Components" on page 8 for the
location of the connector).