Table of Contents
Advertisement
9
Push the remote lockout cam into and through the eyelet/mount and
Push the remote lockout cam into and through the eyelet/mount and
remove the remote lockout cam.
remove the remote lockout cam.
10
Clean the remote lockout cam.
Clean the remote lockout cam.
Remove the inner bushing from the remote lockout cam and discard
Remove the inner bushing from the remote lockout cam and discard
the bushing.
the bushing.
11
Install a new inner bushing onto the remote lockout cam.
Install a new inner bushing onto the remote lockout cam.
12
Clean inside the remote cam slot in the eyelet. Clean the outside of the
Clean inside the remote cam slot in the eyelet. Clean the outside of the
eyelet.
eyelet.
Do not push contaminates into the eyelet/mount. Contaminates can
damage parts or interfere with proper adjuster functions.
NOTICE
Pick (non-metallic)
45
Remote Spring Service
Advertisement
Table of Contents
