R e m o t e S y s t e m B l e e d
If the seatpost will not compress or extend when the remote actuator is depressed, check the hydraulic hose connections for leaking hydraulic fluid.
Tighten the hose connections as needed before performing the remote and seatpost bleed procedure.
Complete
Bicycle Preparation
before beginning the Remote System Bleed.
Reverb™ 1x™ Remote Upgrade Kit: The 1x Remote upgrade lever does not contain hydraulic fluid. The hydraulic remote system must be bled after a
new 1x Remote lever is installed for the first time. Refer to
Reverb: Proceed to
Remote
Do not allow Reverb hydraulic fluid to come into contact with any brake components. Contaminated brake components can compromise brake
performance, may cause brake failure, and can lead to serious injury and/or death.
2 0 0 H o u r S e r v i c e
Disconnect the hose from the frame.
1
Loosen the seatpost collar.
2
Hose Sizing and Remote Installation - Step 5
Preparation.
R e v e r b S t e a l t h R e m o v a l
⚠ WARN ING
for 1x Remote installation.
Remote System Bleed
22