200 (B1) Hour Service; Top Cap And Seal Head Bushing Replacement - SRAM Reverb Stealth Service Manual

2 0 0 ( B 1 ) H o u r S e r v i c e
The following steps are to be completed during the B1 200 hour service interval and include replacing parts included in the Reverb™ Stealth B1
Service Kit - 200 hours. These steps do not require complete disassembly of the upper post assembly and are not included in the B1 400 hour
service.
B1 - To continue with the
A2 - To continue with the
Remove the foam ring from the inner shaft assembly and discard the
1
foam ring.
Remove the bottomout o-ring from the inner shaft assembly and
2
discard the bottomout o-ring.
Spread and remove the seal head bushing and discard the seal head
3
bushing.
The seal head bushing may have sharp edges. Do not scratch the inner
shaft with the bushing. Scratches will cause leaks.
Remove the seal head o-ring. Pinch the o-ring, lift it from the o-ring
4
groove, and remove it. Discard the o-ring.
T o p C a p a n d S e a l H e a d B u s h i n g R e p l a c e m e n t
400 Hour Service proceed to Inner Shaft Disassembly
200 Hour Service proceed to
NOTI CE
(B1).
Inner Shaft Disassembly (A2).
Pick

Top Cap and Seal Head Bushing Replacement

20