4
Remove the washer.
Remove the washer.
Remove the bottom out spacer and clean it.
Remove the bottom out spacer and clean it.
5
Remove the outer eyelet / IsoStrut air can o-ring and discard it.
Remove the outer eyelet / IsoStrut air can o-ring and discard it.
Clean the o-ring groove.
Clean the o-ring groove.
Apply grease to a new o-ring and install it.
Apply grease to a new o-ring and install it.
Set the eyelet/damper shaft assembly aside.
Set the eyelet/damper shaft assembly aside.
6
Remove the large sealhead inner o-ring and discard it.
Remove the large sealhead inner o-ring and discard it.
RockShox Suspension Cleaner
Pick (non-metallic)
Sealhead / Air Piston Removal and Service
Pick (non-metallic)
39