Table of Contents
Advertisement
4
Record your air pressure setting to assist with post-service set up.
Record
your air pressure setting to assist with post-service set up.
Thread a shock pump onto the air valve and check the pressure gauge.
Thread a shock pump onto the air valve and check the pressure gauge.
Remove the air valve cap by hand. Use a small hex wrench to depress
Remove the air valve cap by hand. Use a small hex wrench to depress
the Schrader valve and slowly release all air pressure from the air can.
the Schrader valve and slowly release all air pressure from the air can.
Do not disassemble a pressurized shock, this can cause the air can,
suspension fluid or debris to forcefully eject from the shock. Wear
safety glasses.
Slowly release the air from the air can to make sure the air is removed
from both chambers. Quickly releasing the air can trap air in the
negative chamber and cause the air can to forcefully eject from the
shock upon disassembly.
Use a RockShox Schrader valve tool to remove the valve core from the
Use a RockShox Schrader valve tool to remove the valve core from the
valve body to make sure all air has been removed. Set the valve core
valve body to make sure all air has been removed. Set the valve core
aside.
aside.
5
Loosen and unthread each eyelet/mount bolt (x4) 3 full rotations
Loosen and unthread each eyelet/mount bolt (x4) 3 full rotations
counterclockwise.
counterclockwise.
Do not remove the bolts.
Do not remove the bolts.
Do not disassemble a pressurized shock, this can cause the air can,
suspension fluid or debris to forcefully eject from the shock. Wear
safety glasses.
Slowly release the air from the air can to make sure the air is removed
from both chambers. Quickly releasing the air can trap air in the
negative chamber and cause the air can to forcefully eject from the
shock upon disassembly.
⚠ CAUTIO N
⚠ CAUTIO N
RockShox Schrader valve tool
RockShox Schrader valve tool
4 mm
4 mm
Small hex wrench
4 mm
4 mm
13
IsoStrut Air Can Removal
Advertisement
Table of Contents
