SRAM SIDLUXE ISOSTRUT 2024+ Service Manual page 14

6 Secure a cloth shop towel over the eyelet and the IsoStrut to prevent Secure a cloth shop towel over the eyelet and the IsoStrut to prevent
the eyelet from ejecting from the IsoStrut. the eyelet from ejecting from the IsoStrut.
Unthread 3 of the bolts completely. Unthread 3 of the bolts completely.
Do not remove all four bolts before this is done to avoid the eyelet/
mount ejecting suddenly from the IsoStrut air can in the event the
shock is not fully depressurized.
7 While holding the cloth towel firmly over the eyelet and strut, slowly While holding the cloth towel firmly over the eyelet and strut, slowly
remove the final eyelet bolt until the eyelet suddenly separates from remove the final eyelet bolt until the eyelet suddenly separates from
the strut. Remaining air pressure in the air spring chamber will force the the strut. Remaining air pressure in the air spring chamber will force the
eyelet from the strut. An audible pop will be heard. eyelet from the strut. An audible pop will be heard.
To avoid sudden ejection of the eyelet from the strut, hold the cloth
towel firmly while unthreading the final bolt.
Remove the bolt. Remove the bolt.
Slowly release pressure from the shop towel over the eyelet and allow Slowly release pressure from the shop towel over the eyelet and allow
the eyelet to further separate from the strut. the eyelet to further separate from the strut.
⚠ CAUTIO N
⚠ CAUTIO N
4 mm
4 mm
4 mm
4 mm
4 mm
14
IsoStrut Air Can Removal