SRAM SIDLUXE ISOSTRUT 2024+ Service Manual page 61

3 Clamp the damper body in the vise. Clamp the damper body in the vise.
Install the IFP into the damper body (o-ring side in, flat side out). Install the IFP into the damper body (o-ring side in, flat side out).
Insert the SIDLuxe IFP Height Tool (00.4318.041.000) into the damper Insert the SIDLuxe IFP Height Tool (00.4318.041.000) into the damper
body, flat on top of the IFP. body, flat on top of the IFP.
Slowly and carefully push the IFP to a depth of 55 mm. Slowly and carefully push the IFP to a depth of 55 mm.
Do not push the IFP in too far. If it is pushed into the damper body Do not push the IFP in too far. If it is pushed into the damper body
beyond the specified depth, the IFP must be removed and reinstalled. beyond the specified depth, the IFP must be removed and reinstalled.
SIDLuxe IFP Height Tool
SIDLuxe IFP Height Tool IFP depth - 55 mm
61
IFP Installation and Bleed