SRAM SIDLUXE ISOSTRUT 2024+ Service Manual page 53

9 Apply a dab of grease to the tip of a small hex wrench to secure the Apply a dab of grease to the tip of a small hex wrench to secure the
detent ball. Install the detent ball bearing. detent ball. Install the detent ball bearing.
Use a pick to install the detent spring. Use a pick to install the detent spring.
Apply a dab of grease to the tip of a 2 mm hex wrench to secure the Apply a dab of grease to the tip of a 2 mm hex wrench to secure the
detent set screw. Hold the rebound adjuster in place, install the detent detent set screw. Hold the rebound adjuster in place, install the detent
set screw, and tighten it until it is flush with the eyelet/mount. set screw, and tighten it until it is flush with the eyelet/mount.
Small hex RockShox Dynamic
wrench Seal Grease
Pick
Rebound Adjuster Service (optional)
RockShox Dynamic Seal
2 mm
Grease
2 mm Flush
53