Table of Contents
Advertisement
3
Clamp the damper body eyelet/mount into the vise vertically.
Clamp the damper body eyelet/mount into the vise vertically.
4
Remove the sealhead / air piston bleed screw.
Remove the sealhead / air piston bleed screw.
5
Wrap a shop towel around the damper body.
Wrap a shop towel around the damper body.
Place an oil pan beneath the damper body.
Place an oil pan beneath the damper body.
Do not scratch the damper shaft while removing the sealhead / air
piston. Scratches can cause leaks.
To prevent damage to the damper body, do not allow the wrench to
slip from the sealhead / air piston.
Unthread the sealhead / air piston one full turn.
Unthread the sealhead / air piston one full turn.
⚠ CAUTI ON - EYE HAZARD
If fluid is foaming from the damper body when the sealhead / air
piston is loosened, the IFP seal has failed and the fluid inside the
damper is pressurized. If this occurs, stop and allow the pressure to
gradually release before continuing.
NOTICE
2 mm
19 mm or adjustable wrench
30
Damper Removal
Advertisement
Table of Contents
