SRAM SIDLUXE ISOSTRUT 2024+ Service Manual page 33

3 Unthread the air valve adapter from the damper body. Unthread the air valve adapter from the damper body.
4
Unthread the Schrader valve completely, then thread it back into the Unthread the Schrader valve completely, then thread it back into the
damper one half turn so the threads are engaged but not tight. The damper one half turn so the threads are engaged but not tight. The
Schrader valve must be loose when the IFP is reinstalled. Schrader valve must be loose when the IFP is reinstalled.
5 Spray RockShox Suspension Cleaner inside and outside of the damper Spray RockShox Suspension Cleaner inside and outside of the damper
body. body.
Place the damper body vertically onto a shop towel and allow the Place the damper body vertically onto a shop towel and allow the
excess oil and cleaner to drain. excess oil and cleaner to drain.
6 Inspect the inside and outside surfaces of the damper body for Inspect the inside and outside surfaces of the damper body for
scratches, dents, or other surface deformations with a light. If any scratches, dents, or other surface deformations with a light. If any
deformations are found, the damper body will need to be replaced. deformations are found, the damper body will need to be replaced.
Set the damper body aside. Set the damper body aside.
SIDLuxe Air Valve Adapter (blue)
RockShox Schrader valve tool
RockShox Suspension Cleaner
Light
33
IFP Removal