Attaching Dual Feed Foot Ad Or Dual Feed Plus Professional Foot Hp2; Attaching The Ruler Work Foot Qr; Attaching The Professional Grade Foot Hp - ELNA eXcellence 792PRO Instruction Book

1. 2.
(2)
(3)
(1)
3.
4.
(2)
Attaching Dual Feed Foot AD or Dual Feed Plus
Professional Foot HP2
1. Attach the dual feed holder to the presser bar from
behind.
(1) Dual feed holder
2. Tighten the thumbscrew with your fingers.
Push the dual feed link to engage it with upper feed
drive.
(2) Dual feed link
(3) Upper feed drive
3. Lower the presser foot lifter.
Lower the needle to the lowest position by turning the
handwheel.
4. Tighten the thumbscrew securely with the
screwdriver.

Attaching the Ruler Work Foot QR

Attach the ruler work foot QR to the presser bar from
behind.
Tighten the thumbscrew firmly with the screwdriver.

Attaching the Professional Grade Foot HP

Attach the professional grade foot HP to the presser bar
from behind.
Lower the presser foot with the presser foot lifter.
Tighten the thumbscrew firmly with the screwdriver.
23