Winding The Bobbin - ELNA eXcellence 792PRO Instruction Book

(2)
(3)
(3)
(1)
(2)
(3)
(1)
(2)
(7)
(1)
(4)
(5) (5)
(4)
(4)
(6)

Winding the Bobbin

Removing the bobbin
Press the lockout key. Slide the hook cover release
button to the right, and remove the hook cover plate.
(1) Hook cover release button
(2) Hook cover plate
Lift out the bobbin from the bobbin holder.
(3) Bobbin
NOTE:
• Use "J" plastic bobbins (4) for the horizontal hook.
Using other bobbins, such as pre-wound paper
bobbins, may cause stitching problems and/or
damage to the bobbin holder.
• Do not use the easy bobbins or metal bobbins.
Setting the spool of thread
Place the spool of thread on the spool pin with the thread
coming off the spool as shown.
Attach the spool holder, and press it firmly against the
spool of thread.
(1) Spool of thread
(2) Spool pin
(3) Spool holder (large)
Use the spool holder (large) for ordinary spools, and the
spool holder (small) for small spools.
(4) Small spool
(5) Spool holder (small)
NOTE:
Avoid using a paper cored spool when it begins to
empty since it will not unwind smoothly. It may cause
the thread to bunch or slip when using the auto thread
cutter.
Setting the thread cone
Use the spool rest and the spool net for thread cones.
Attach the spool rest on the spool pin.
Place the thread cone on the spool pin.
(2) Spool pin
(6) Thread cone
(7) Spool rest
26