w
e
q
q
w
w
Attaching the Dual Feed Foot (Optional item)
Attach the dual feed holder to the presser bar.
q Dual feed holder
Tighten the thumbscrew with your fingers.
Push the dual feed link to engage it with upper feed drive.
w Dual feed link
e Upper feed drive
Lower the presser foot lifter. Lower the needle to the
lowest position by turning the hand wheel.
Tighten the thumbscrew securely with the screwdriver.
Attaching the Darning Foot PD-H
Attach the darning foot PD-H to the presser bar by
putting the pin on the needle clamp screw.
q Pin
w Needle clamp screw
Tighten the thumbscrew firmly with the screwdriver.
Attaching the Professional grade Foot HP
(Optional item)
Attach the professional grade foot HP (optional item) to
the presser bar.
Tighten the thumbscrew firmly with the screwdriver.
19