Ruler Work - ELNA eXcellence 792PRO Instruction Book

(3)
(1) (2)

Ruler Work

CAUTION:
Do not lower the needle while the foot is raised,
otherwise the needle clamp may hit the foot and
cause injury or breakage.
Guide the foot along the quilting template (optional) to
create straight, curved or repetitious patterns depending
on the shape of the ruler.
Attach the ruler work foot QR when "Ruler Work" is
displayed as shown.
Use the straight stitch needle plate for better results (refer
to page 25).
Refer to page 23 for how to attach the ruler work foot.
Place the fabric under the ruler work foot.
Adjust the presser foot height to suite the quilt thickness.
(4)
For ordinary and bulky quilts, select "Medium".
For flatter quilts, select "Light".
(5)
(1) Medium
(2) Light
You can finely adjust the presser foot height by pressing
the "+" or "–" key on the manual setting window, press the
adjust key to open the manual setting window.
(3) Adjust key
(4) "+" key
(5) "–" key
Attach the A.S.R. foot and press A.S.R. key to use A.S.R.
function (refer to pages 125-127).
Use the A.S.R. ruler work foot ASR-QR for ruler work.
Place the quilting template on the edge of the ruler work
foot.
Sew while guiding the fabric and ruler together along the
edge of the ruler work foot.
NOTE:
• A ruler (quilting template) for ruler work sewing is
required.
• Use the ruler (quilting template) for high shank or
long arm quilting machines (4.5 mm - 6.35 mm
thickness).
• When you use the A.S.R. function, printing, marks or
tape on the upper side of ruler can cause stitching
length problems. Place printing, marks or tape on
the lower side of the ruler.
• Opaque or colored rulers can cause stitching length
problem. Use a transparent ruler.
• The purple tip needle is recommended to prevent
skipped stitches.
128