Replacing The Needle Plate For Emergency - ELNA eXcellence 792PRO Instruction Book

1.
2.
(3)
3.
4.
(1)
(3)
(4)

Replacing the Needle Plate for Emergency

CAUTION:
Never turn the needle plate release dial while running
the machine.
If the needle plate will not automatically snap off when
pressing the needle plate release key on the lockout
screen, you can replace the needle plate using the
needle plate release dial.
(1) Needle plate release key
1. Raise the needle by turning the handwheel.
Raise the presser foot.
Remove the needle plate release dial cap with a
screwdriver.
(2) Needle plate release dial cap
(2)
2. Push and turn the needle plate release dial clockwise
with the screwdriver to remove the needle plate.
(3) Needle plate release dial
3. A warning message will appear that the needle plate
is not secured.
Turn the needle plate release dial counterclockwise
with the screwdriver to be at set position.
Attach the needle plate.
(4) Set position
4. A message will appear, so that press the X key after
attaching the proper presser.
145