Attaching Dual Feed Foot Ad Or Dual Feed Plus Professional Foot Hp2; Retractable Sewing Light - ELNA eXcellence 782 Instruction Book

1. 2.
(2)
(3)
(1)
3.
4.
(2)
(1)
(2)
Attaching Dual Feed Foot AD or Dual Feed Plus
Professional Foot HP2
1. Attach the dual feed holder to the presser bar from
behind.
(1) Dual feed holder
2. Tighten the thumbscrew with your fingers.
Push the dual feed link to engage it with upper feed
drive.
(2) Dual feed link
(3) Upper feed drive
3. Lower the presser foot lifter.
Lower the needle to the lowest position by turning the
handwheel.
4. Tighten the thumbscrew securely with the
screwdriver.

Retractable Sewing Light

In addition to the twin LED lights, the machine is
equipped with a retractable sewing light.
Place your finger in the groove and slide the arm towards
you. The light will turn on automatically.
(1) Arm
(2) Groove
Push back the arm to turn the light off and store it.
CAUTION:
Do not hit or exert excessive force on the arm of the
retractable sewing light as this may cause damage
when it is extended.
31