ELNA eXcellence 792PRO Instruction Book page 142

(5)
(6)
(7)
(8)
(9)
(10)
(11)
(12)
(13)
(14)
(5) Upper Thread Breakage Sensor
If you want to turn off the auto-stop function when the
upper thread (needle thread) breaks, turn off the upper
thread breakage sensor.
(6) Bobbin Thread Remaining Sensor
If you want to turn off the auto-stop function when
the bobbin thread runs out, turn off the bobbin thread
remaining sensor.
(7) Feed Dogs
Press the right side of this option if you wish to sew
decorative stitches and sewing applications with the feed
dogs down.
Press the drop feed key to change this option to drop.
(8) Assist in Inserting/Removing Fabric
Set the feed dogs up or down automatically when the
presser foot is raised.
Press the next page key to show the next menu.
(9) Foot Height for Pivoting
When the foot up option is turned on, the presser foot will
automatically go up when the machine stops.
The height of the foot in the up position can be adjusted
by pressing the "+" key or "–" key in accordance with
thickness of the fabrics.
(10) Adjustable Start-Up Speed
The machine will start running slowly and the sewing
speed will gradually increase to maximum. You can
select the desired start-up speed from slow, medium
or high by pressing the corresponding key, and set the
speed for the start/stop button or foot control individually.
Press the next page key to show the next menu.
(11) Variable ZZ Sensitivity
You can adjust the amount of needle swing with the knee
lifter movement for variable zigzag in sewing applications.
Press the "+" key so the needle swings a small amount
when moving the knee lifter.
Press the "–" key so the needle swings a large amount
when moving the knee lifter.
(12) A.S.R. Sensitivity
You can adjust and save the A.S.R. sensitivity setting.
Press the "+" key to increase A.S.R. sensor sensitivity.
Example: Press the "+" key when the stitch length is not
stable or the sewing speed changes too slowly.
Press the "–" key to decrease A.S.R. sensor sensitivity.
Example: Press "–" key when the sewing speed is too
fast.
(13) A.S.R. Overspeed Warning Sound
The buzzer sounds when the fabric moves faster than the
value set by A.S.R. Sensitivity. Press the "OFF" key to
delete the buzzer sound.
(14) Confirm to Delete Pattern Combination
When the combination mode is cancelled, a message will
appear before deleting patterns. When "OFF" is selected,
the confirmation message will not be displayed.
Press the next page key to show the next menu.
140