Quilt; Patchwork Piecing - ELNA eXcellence 792PRO Instruction Book

(1)
(2)

Quilt

Press the quilt tab and the quilt sewing application menu
will open.
(1) Quilt tab

Patchwork Piecing

There are 6 stitches for seaming patchwork pieces in this
section.
The default stitch length is set at 1.8 mm, ideal for
patchwork piecing, but you can fine tune the stitch length
by pressing the "+" or "–" key.
(2) Stitch length adjusting key
Attach 1/4˝ seam foot O, which helps you to keep a
constant 1/4˝ (6 mm)* seam allowance.
Put 2 pieces of fabric with right sides together.
Place the patchwork pieces under the foot so that the
edge of the fabric matches the guide on the presser foot.
(3) Edges of fabric
(4) Guide on the 1/4˝ seam foot O
* You can choose 1/4˝ (6 mm) or 7 mm seam allowance.
Keys for 7 mm seam allowance are displayed on the
next page (2/2).
(4)
(3)
When you stop the machine, a message will appear.
Press the OK key and the machine memorizes the seam
length to sew another piece of the same length.
Press the X key to sew in a different size.
After sewing the memorized length, a message will
appear.
To sew the same length, start the machine and it will stop
automatically after sewing the memorized length.
Press the X key to sew in a different size.
123