Thermador Pro Grand PRD364WDGU/C Use And Care Manual page 33

Slide the tip of a flat blade screw driver between the
3.
holder clip and the lamp housing.
1
Support the glass lens cover with fingers along the bot-
4.
tom edge to prevent the cover from falling to the bottom
of the oven. Gently twist the flat blade screw driver to
loosen the glass lens cover
Remove the glass lens cover.
5.
Remove the bulb by grasping and sliding the bulb
6.
straight back until the two prongs have cleared the ce-
ramic holder
DO NOT touch the glass of the new replacement bulb
7.
with your fingers. It may cause the bulb to fail when it
first lights. Grasp the replacement bulb with a clean dry
cloth. Locate the two prongs in the ceramic holder, gen-
tly poking until the two prongs locate in the ceramic
socket ⁠ .
4
Press down to seat the bulb.
8.
Slide the protective lens into the holder clip and push
9.
the other end until the fixing clip snaps back into the
housing ⁠ .
Turn on the circuit breaker.
10.
2
⁠ .
3
Cleaning and maintenance en-us
33