Maintenance - Thermador Pro Grand PRD364WDGU/C Use And Care Manual

en-us Cleaning and maintenance
Starting self clean on models without display
Requirements
All heating modes or timers are canceled.
¡
You have carried out the steps for preparing the oven
¡
for self clean.
→ "Preparing self clean", Page 31
Turn the mode selection knob to SELF CLEAN.
1.
Turn the temperature selection knob to CLEAN.
2.
Check if the door is locked.
3.
Note: Do not use self clean if the oven door does not
lock.
Self-clean duration is 2 hours.
a
Starting self clean on models with display
Requirements
All heating modes or timers are canceled.
¡
You have carried out the steps for preparing the oven
¡
for self clean.
→ "Preparing self clean", Page 31
Turn the mode selection knob to SELF CLEAN.
1.
Turn the temperature selection knob to CLEAN.
2.
Press the right or to select the clean level.
3.
Soil level
Low
High
Press ENTER.
4.
An information text appears.
a
Press ENTER.
5.
Within 20 seconds the door locks and
a
Check if the door is locked.
6.
Note: Do not use self clean if the oven door does not
lock.
Setting an end timer for self clean
Turn the mode selection knob to SELF CLEAN.
1.
Turn the temperature selection knob to CLEAN.
2.
Press the right or to select the clean level.
3.
Press ENTER.
4.
Press TIMERS.
5.
Press the left or to select "End Time".
6.
Press the right or to set an end time.
7.
Press ENTER.
8.
After the information text, press ENTER.
9.
Completing self clean
When self clean is finished, the oven cools down. The
door latch will open automatically when the oven is below
500°F (260°C).
CAUTION
To avoid risk of burns, let the oven cool down completely
before opening the oven door. The oven cavity is still at
baking temperatures when the door latch is released after
self clean.
Turn the mode selection knob and the temperature se-
1.
lection knob to OFF.
Wipe the remaining ash from the oven with a moist
2.
cloth.
32
Duration (excluding cool off)
1½ hours
3 hours
appears.
Note: After self clean is complete, the self clean function
will be prevented from running again for a period of
24 hours.
11.4 Maintenance
Replacing an oven light bulb
When the oven light fails you can replace the light bulbs.
WARNING
Light socket is live when door is open if main power supply
is not turned off.
Turn off main power supply at the service panel before
▶
changing the light bulbs.
WARNING
Make sure the appliance and lights are cool and power to
the appliance has been turned off before replacing the
light bulb(s). Failure to do so could result in electrical
shock or burns.
The lenses must be in place when using the appliance.
▶
The lenses serve to protect the light bulb from breaking.
▶
The lenses are made of glass. Handle carefully to avoid
▶
breaking. Broken glass can cause an injury.
Light bulb specifications
Your range uses a light bulb with one of the following
specifications. Check the inside of the light bulb housing to
determine the correct light bulb for you range model.
Bulb description
10 Watt, halogen bulb,
G4 base, 12 Volts
25 Watt, halogen bulb,
G9 base, 120 Volts
Replacing an oven light
Note: The graphics are representative. Your appliance
may have different graphic appearances.
Requirements
Refer to the oven light bulb chart for the oven light spec-
¡
ification of your oven.
Follow the safety instructions on replacing a light bulb.
¡
→ Page 32
Turn off the power to the oven at the main power supply
1.
(fuse or breaker box).
Remove the oven racks.
2.
Bulb image