Placing The Burner Grates; Register Your Appliance - Thermador Pro Grand PRD364WDGU/C Use And Care Manual

en-us Before using for the first time
Placing the burner caps
Each cap has a letter (B, D, or F) cast in the underside of
the cap that corresponds to a letter (B, D, or F) cast in the
burner base that is attached to the appliance.
Place each burner cap on its correct burner base per its
1.
corresponding letter designation.
Place the burner cap gently on top of base so that the
2.
prongs of the burner base fit snugly into the groove of
the burner cap.
Check each burner to make sure there is no gap be-
3.
tween the burner cap and burner base.
Gently try to move the burner caps from side to side
‒
to check if the caps are properly placed on the burner
bases.
When properly placed, each burner cap rests flat on
‒
top of its burner base, and completely covers the
star-shape of the burner base when viewed from the
top.
6.4 Placing the burner grates
For proper combustion do not use the rangetop without
the burner grates in place.
Place the burner grates flat-side down and align them
1.
into the rangetop recess.
The burner grates should rest flush against each other
2.
and against the sides of the recess.
18
6.5 Register your appliance
Register your Thermador product to access your prod-
▶
uct related information. For product registration informa-
tion see
→ "Customer Service", Page 36
→ "Customer Service", Page 36 .