Before Using For The First Time; Start-Up Settings; Cleaning The Appliance Before Using It For The First Time; Burner Cap Placement - Thermador Pro Grand PRD364WDGU/C Use And Care Manual

Push the rack in until it is even with the front hooks.
3.
Lift the rack up to lock the last hook into place.
4.
Push the rack in completely.
5.
Make sure that the front hooks of the telescopic rack
6.
engage in the oven rails.
6 Before using for the first time

Before using for the first time

Carry out these steps before using your appliance.
Before using for the first time
The appliance must be properly installed by a qualified
¡
service provider before use.
Read and understand all safety precautions → Page 3
¡
and information in the Use and Care Guide prior to op-
erating.
Download the Home Connect® (America) app to re-
¡
motely control your appliance, get cooking inspiration,
and access service tips and support.
→ "Home Connect® ", Page 25
This Use and Care Guide covers several models. Not
¡
all features are available on all models.
6.1 Start-up settings
After the appliance has been connected to the power sup-
ply, you are prompted to set some basic settings to ensure
you can use your appliance conveniently and safely.
Requirement: All oven control knobs are turned to OFF.
Connect the appliance to the power supply.
1.
The basic settings open automatically.
a
Before using for the first time en-us
Select a setting with the left or ⁠ .
2.
Change the desired option with the right or ⁠ .
3.
Press ENTER to confirm the selection or SETTINGS to
4.
discard the changes.
The screen changes to standby mode.
a
Note: You can access the settings at any time by pressing
SETTINGS while the appliance is in standby mode. All
oven knobs must be turned to OFF to access the settings.
6.2 Cleaning the appliance before using it for
the first time
Clean the oven cavity and accessories before using the
appliance to prepare food for the first time.
Remove all packaging materials from the oven cavity.
1.
For models with two ovens check both oven cavities.
Before heating the appliance, wipe the smooth surfaces
2.
in the oven cavity with a soft, damp cloth and dry.
Keep the room ventilated while the appliance is heating.
3.
Heat up the oven according to the following instructions.
4.
With conventional heating mode:
– Set the oven to CONV BAKE at 450°F (230°C) for
20 to 30 minutes.
– Then set the oven to BROIL for 20 to 30 minutes.
With self-clean function (if equipped):
– Remove oven racks.
– Set the oven to SELF CLEAN.
→ "Self clean function", Page 31
Wait until the oven cavity has cooled off.
5.
Clean the smooth surfaces with soapy water and a dish
6.
cloth.
Wash the accessories thoroughly with soapy water and
7.
a cloth and rinse well.
If equipped, heat up the electric griddle for about
8.
10 minutes to eliminate manufacturing residues and
smells. Let cool and wash with warm soapy water and
rinse well.
Note: There may be a slight odor during first uses. This is
normal and will disappear.
6.3 Burner cap placement
The burner caps must be properly placed for the cooktop
to function properly.
If the burner cap is not properly placed, one or more of the
following may occur:
Burner flames are too high
¡
Flames shoot out of the burners
¡
Stainless steel discolorations
¡
Burners do not ignite
¡
Burner flames light unevenly
¡
Burner emits gas odor
¡
WARNING
To prevent flare-ups do not use the cooktop without all
burner caps and all burner grates properly positioned.
CAUTION
To prevent burns, do not touch burner caps or grates while
hot.
Turn the cooktop off and allow the burners to cool.
▶
Your rangetop has sealed STAR® burners. There are no
burner parts under the rangetop to clean, disassemble or
adjust.
17