Device Control Block (Search Dial) - Sony MVS-8000 User Manual

Hide thumbs Also See for MVS-8000:

Table of Contents

Move to the right to run the effect in the

normal direction, and to the left for the

reverse direction.

When the VTR/disk recorder/frame

memory operation mode is enabled

Moving the joystick sideways controls the

tape transport/disk drive/frame memory

Device Control Block (Search Dial)

The description below of frame memory

clip operations applies only to the MVS-

8000A/8000G.

Using the device control block (search

dial), you can directly operate an XDCAM,

4 DELAY button

2 Device selection buttons

clip operation, at a speed determined by the

operating buttons.

When the resizer control mode is enabled

(for the MVS-8000G only)

Move for operations in the x-, y-, and z-

axes. Hold down the button on the tip of the

joystick to switch the joystick operation to

a finer control. (fine mode)

disk recorder, VTR, other external device,

frame memory clip, or shotbox. The device

control block (trackball) and device control

block (joystick) can be used together.

1 Timecode display

Names and Functions of Parts of the Control Panel

7 TIMELINE button

8 STOP button

6 External device

operation buttons

9 Search dial

3 SBOX buttons