Three-Dimensional Parameter Display - Sony MVS-8000 User Manual

Functions assignable to trackball and Z-ring operations
Button Usable coordinate
space
ASP PERS Source
Target
SHIFT+ Source
ASP PERS

Three-Dimensional Parameter Display

You can check the values of the three-dimensional parameters in the DME
menu.
Displaying the three-dimensional parameters in the DME menu
In the menu control block, select the top menu selection button [DME].
The DME menu appears. The status area shows the three-dimensional
parameters currently controlled by the device control block.
• When multiple DME channels are selected, this shows the parameters for the
reference channel.
• When both Global and Local are selected, the three-dimensional parameters
are shown for the channel (the reference channel) for which the button is lit
green.
Trackball x- Trackball y-
direction direction
Change aspect ratio Change aspect ratio
on x-axis on y-axis
Shift view point on x- Shift view point on y-
axis axis
Change skew on x- Change skew on y-
axis axis
Three-Dimensional Transformation Operations
Z-ring
Change aspect ratio
on x- and y-axes
simultaneously
Change distance
from view point to
image
Change aspect ratio
on x- and y-axes
simultaneously
591