Sony MVS-8000 User Manual page 717

Notes
• The BZDM-9050 Texture Lighting Software (for MVE-9000) is
required to enable Texture or Non Linear.
An install key must be entered to use the software (For details, see
"Installation and Device Setup (Install/Unit Config Menu)" in Chapter
18 (Volume 3).)
• The Spotlighting Non Linear setting is effective for the following
nonlinear effects. For any other nonlinear effect, the result of selecting
the Non Linear setting is the same as selecting Flat.
Wave, Mosaic Glass, Flag, Ripple, Lens, Panorama, Page Turn, Roll.
5
If you selected Texture or Non Linear in step 4, set the following
parameters.
Parameters when you selected Texture
• SD format
Knob Parameter
1 X
2 Y
3 Size X
4 Size Y
5 Amp
a) Minus moves left, plus moves right.
b) Minus moves down, plus moves up.
c) Plus emphasizes bumps in texture, minus emphasizes depressions. 0.00 is a flat surface.
• HD format
Knob Parameter
1 X
2 Y
3 Size X
4 Size Y
5 Amp
a) Minus moves left, plus moves right.
b) Minus moves down, plus moves up.
c) Plus emphasizes bumps in texture, minus emphasizes depressions. 0.00 is a flat surface.
Parameters when you selected Non Linear
Knob Parameter
5 Amp
Adjustment
Movement in X-axis direction
Movement in Y-axis direction
Image size in X-axis direction
Image size in Y-axis direction
Emphasize bumps and
depressions
Adjustment
Movement in X-axis direction
Movement in Y-axis direction
Image size in X-axis direction
Image size in Y-axis direction
Emphasize bumps and
depressions
Adjustment
Distance of light
Setting values
a)
–8.00 to +8.00
b)
–6.00 to +6.00
0.50 to 16.00
0.50 to 16.00
–100.00 to +100.00
Setting values
a)
–32.00 to +32.00
b)
–24.00 to +24.00
0.50 to 16.00
0.50 to 16.00
–100.00 to +100.00
Setting values
–100.00 to +100.00
DME Special Effect Operations
c)
c)
a)
717