Border Settings - Sony MVS-8000 User Manual

Border Settings

Adding a border
1
2
3
612
DME Special Effect Operations
In the DME menu, select VF1 'Edge' and HF1 'Border/Crop.'
The Border/Crop menu appears.
Press [Border], turning it on.
The Border effect is enabled. You can adjust the border width parameters
with the knobs.
Set the parameters.
The valid ranges of the parameter values depend on the combination of
signal format (SD/HD) and aspect ratio (4:3/16:9) selected in the system,
as follows.
• 4:3 mode
Knob Parameter
1 H
2 V
3 All
5 Density
Knob Parameter
1 Top
2 Left
3 Right
4 Bottom
5 Density
Parameter group [1/2]
Adjustment
Border width on left and right
sides
Border width on top and bottom
sides
Border width on all sides
Border density
Parameter group [2/2]
Adjustment
Border width on top side
Border width on left side
Border width on right side
Border width on bottom side
Border density
Setting values
Left value shown
Top value shown
Left value shown
0.00 to 100.00
Setting values
–6.00 to +6.00 (SD)
–18.00 to +18.00 (HD)
–8.00 to +8.00 (SD)
–24.00 to +24.00 (HD)
–8.00 to +8.00 (SD)
–24.00 to +24.00 (HD)
–6.00 to +6.00 (SD)
–18.00 to +18.00 (HD)
0.00 to 100.00