4
Depending on the selection in step 3, adjust the following parameters.
• When Black or Gamma is selected
Knob
1
2
3
4
• When White is selected
Knob
1
2
3
4
• When Knee is selected
Knob
1
2
3
4
To return the parameters to their default settings
In the <Primary CCR> group, press [Unity].
Masking a part of the primary color correction
Here the procedure for mask 1 operation is described by way of example. You
can carry out mask 2 operation in a similar way.
1
In the <Primary Mask> group of the Primary CCR menu, press [Mask1],
turning it on.
2
Press [Mask1 Adjust].
The Mask1 Adjust menu appears.
3
In the <Mask Source> group, select the mask source.
Box: signal from dedicated box generator
Pattern: signal from dedicated pattern generator
Parameter
Adjustment
Red
Red signal adjustment
Green
Green signal adjustment
Blue
Blue signal adjustment
All
Simultaneous RGB adjustment
Parameter
Adjustment
Red
Red signal adjustment
Green
Green signal adjustment
Blue
Blue signal adjustment
All
Simultaneous RGB adjustment
Parameter
Adjustment
Red
Red signal adjustment
Green
Green signal gain
Blue
Blue signal gain
All
Simultaneous RGB adjustment
Setting values
–100.00 to +100.00
–100.00 to +100.00
–100.00 to +100.00
Red value is shown
Setting values
0.00 to 200.00
0.00 to 200.00
0.00 to 200.00
Red value is shown
Setting values
20.00 to 75.00
20.00 to 75.00
20.00 to 75.00
Red value is shown
Color Corrector Functions
469