Sony MVS-8000 User Manual page 629

2
Set the following parameters.
Knob
1
2
3
4
5
a) The Soft parameter is valid only when [Internal] is selected in the <Flex Shadow Source>
group.
Setting the center point of the flex shadow
1
In the Flex Shadow menu, press [Axis Loc], turning it on.
2
Adjust the following parameters.
The valid ranges of the parameter values depend on the combination of
signal format (SD/HD) and aspect ratio (4:3/16:9) selected in the system,
as follows.
• 4:3 mode
Knob
1
2
• 16:9 mode
Knob
1
2
Parameter Adjustment
Size H Enlarge or shrink horizontally
Size V Enlarge or shrink vertically
Size All Enlarge or shrink horizontally and
vertically
a) Softness of shadow
Soft
Density Density of shadow
Parameter Adjustment
Axis Loc H Move the shadow center axis
horizontally
Axis Loc V Move the shadow center axis
vertically
Parameter Adjustment
Axis Loc H Move the shadow center axis
horizontally
Axis Loc V Move the shadow center axis
vertically
Setting values
0.00 to 2.00
0.00 to 2.00
Value of Size H
shown
0.00 to 100.00
0.00 to 100.00
Setting values
–8.00 to +8.00 (SD)
–24.00 to +24.00 (HD)
–6.00 to +6.00 (SD)
–18.00 to +18.00 (HD)
Setting values
–8.00 to +8.00 (SD)
–32.00 to +32.00 (HD)
–4.50 to +4.50 (SD)
–18.00 to +18.00 (HD)
DME Special Effect Operations
629