Keyframe Control Block - Sony MVS-8000 User Manual

REC: When pressed simultaneously with
the [PLAY] button, this button lights
red (the [PLAY] button lights amber),
and the image from the selected device
is recorded.
This button cannot be used for frame
memory clip operations.
f External device operation buttons
ENBL (enable): When this is pressed,
turning it on, the search dial [VAR],
[JOG], and [SHTL] button operations
are enabled.
VAR (variable): Sets the search dial to
variable mode.
JOG: Sets the search dial to jog mode.
SHTL (shuttle): Sets the search dial to
shuttle mode.

Keyframe Control Block

In the keyframe control block, you can
carry out effect editing and execution.
82
Names and Functions of Parts of the Control Panel
g TIMELINE button
Press to switch the device selected with the
device selection buttons to timeline setting
mode.
h STOP button
When pressed, this lights amber, and
operation of the device selected with the
device selection buttons stops.
i Search dial
Use this for search and other operations on
the material of an external device.
For details of the method of use, see
"Controlling Tape/Disk Transport" in
Chapter 12 (Volume 2).