Frame Memory Clip Operations; Preparations For Operation; Recalling Clips - Sony MVS-8000 User Manual

Frame Memory Clip Operations

For an overview of frame memory clip concepts, see "Frame Memory Clip
Function" (page 405).
Notes
• The frame memory clip function is supported on the MVS-8000A/8000G
only.
• During playback of a frame memory clip of the pair assigned to either of the
target FM selection buttons (see page 409), frame memory operations may
not be performed properly. Carry out frame memory operations after
stopping clip playback.

Preparations for Operation

The preparations for using a frame memory clip (hereafter, a "clip") are the
same as for a still image operation. See "Preparations" (page 380) and
"Selecting Outputs and Target Frame Memory" (page 385).

Recalling Clips

Recalling a clip
You can recall a clip from each of frame memories 1 to 8.
1
In the Frame Memory menu, select VF2 'Clip' and HF1 'Recall.'
The Recall menu appears. (See following figure)
• When [Pair] is set to On, only pair files (sets of main file and sub file)
are shown.
• When [Pair] is set to Off, both of single files and pair files are shown.
Frame Memory Clip Operations
407