Setting The Key Priority By A Menu Operation - Sony MVS-8000 User Manual

Changing the key priority for after the transition
When executing a transition, turning on the next transition selection button
[KEY PRIOR] causes the keys to be rearranged based on the set priority.
To set the key priority for after the transition, use the following procedure.
1
2
3
4

Setting the Key Priority by a Menu Operation

Changing the priority of the currently inserted keys
1
164
Key Priority Setting
In the transition control block, hold down the [PRIOR SET] button and
press the [KEY PRIOR] button to turn it on. Do not release the [PRIOR
SET] button before advancing to step 2.
The [KEY PRIOR] button lights green, and it becomes possible to change
the key priority setting for after the transition.
Hold down the [PRIOR SET] button, and press the one of the next
transition selection buttons [KEY1] to [KEY4] ([DSK1] to [DSK4]
buttons in the PGM/PST bank) for the key you want to bring to the front
after the transition.
To set the priority to be the same as before the transition, press the [BKGD]
button.
Notes
The [BKGD] button is only effective when in the mode for changing the
key priority for after the transition.
When the next transition selection button [KEY PRIOR] is on, the selected
key appears on top on the preview monitor. The priority of keys other than
the selected one does not change.
To change the priority of more than one key, repeat the previous operation
as required.
Execute the transition.
The keys are rearranged based on the set priority.
In the M/E or PGM/PST menu, select first VF7 'Misc,' then HF3 'Key
Priority.'
The Key Priority menu appears.