Table of Contents
Advertisement
8. Install the toilet as shown in the illustration, and use a spirit
level to ensure the toilet remains level.
8. 如图将座便器装上，并用水平尺测量座便器是否平衡。
Note: Please refer to the installation instructions of the toilet.
注：实际安装座便器时，依照对应座便器的安装方法。
2H� Following the steps: 1H� Installation of
faceplate
2H� 按照步骤：1H� 面板安装
2I� After installation, the water supply and
electricity can be connected and used
2I� 安装完毕，可以通水或者通电使用
REMOVAL AND MAINTENANCE
A� Removal
A� 拆卸
1. As shown, hold the faceplate with both hands and push
upward and outside to take down the faceplate, then remove
the air hoses of the full-flush dark gray and the half-flush
blue. Then remove the faceplate.
1. 如图拆卸面板时，用双手握住面板用力向上推，并向外松动，
轻轻拆下面板后，并拆下面板上连接的水箱大冲深灰色和小
冲蓝色气管。
2. Pay special attention when dismantling the locking plate's
four fixation pipes, all bolts shall align with the "OPEN" mark.
2. 如图将定位板拆卸时注意四颗固定管要全部对准 "OPEN" 字
样。
1476533-K2-A
Full
Flush Button
大排按钮
Finished Installation Illustration
拆卸与维护
Faceplate
面板
Locking plate
定位板
-28-
Spirit Level
水平尺
Half Flush Button
小排按钮
安装完毕示图
Connect to Air Hose
接水箱导气软管
Faceplate
面板
Fixation Pipe
固定管
Advertisement
Table of Contents
