Faceplate Installation - Kohler VIA K-20630T-BW Installation Instructions Manual

E. Faceplate Installation
E.
According to different faceplates, there are different faceplate
installations as below:
1. K-20341T-PNE/K-75890T-PNE/K-24149T/K-24151T
installation
1. K-20341T-PNE/K-75890T-PNE/K-24149T/K-24151T
1) When tighten four locknuts on supporting board, adjust
to "OPEN" mark as shown.
1)
OPEN
2) Tighten four screws to "LOCK" mark after installing
supporting board as shown.
2)
3) Install the big flush air hose and small flush air hose to
the cover. Put the lock on the cover directly on the
reversed lock on supporting board, then push the cover
and lock it. The installation shall begin from bottom to
top.
Note: Cut the excessive parts of the air hose if necessary
and fix it onto the tank fastener.
3)
Connect to air hose
1402749-T01-A
Locknut
LOCK
-13-
Supporting Board
Faceplate
Lock
Supporting
Board
Fastener
Faceplate