Table of Contents
Advertisement
Installation of remote controller holder
NOTE: If the wall for installation is made of special material (such as wood board, density board and etc.), proper fixing
methods shall be adopted.
NOTE: The place to install the remote controller shall not be easily splashed by water.
Choose a mounting location for the remote holder that is easily accessible while sitting on the seat.
Drilling two holes with depth larger than 45mm on the wall by drill with a diameter of 6mm in accordance with the
position of screw holes on the remote control holder, and then installs the expansion tube into the holes.
Place the installation holder on the fixing hole；
Fix the holder with screws and install it.
Install the screw covers on the screws；
Place the remote controller on the holder.
Installation steps：
Public anti-loss installation：
1383620-KR01-A
Fig 18
Expansion pipe
Fig 19
12
Kohler Co.
Advertisement
Table of Contents
