Winremove - Texas Instruments TI-89 Developer's Manual

1188

WinRemove

Declaration: void WinRemove (WINDOW * w , BOOL UpdateScreen )
Category(ies): Windows
Description: Close a window, releasing any memory assigned to it.
Inputs: w
UpdateScreen — If TRUE then the next window in the linked list of
Outputs: None
Assumptions: All windows opened with WinOpen must be closed with either WinClose
or WinRemove.
Side Effects: None if UpdateScreen is FALSE, otherwise the same as WinClose.
Availability: On AMS 2.00 and higher.
TI-89 / TI-92 Plus
Differences: None
See Also: WinOpen, WinClose
Example:
/* virtual windows are normally closed with WinRemove as shown in this example */
if (WinOpen(&VirtW, MakeWinRect(0,0,COL_MAX,ROW_MAX),WF_VIRTUAL | WF_NOBORDER)) {
/* . . . use VirtW . . . */
WinRemove( &VirtW, FALSE );
}
TI-89 / TI-92 Plus Developer Guide
Appendix A: System Routines — Windows
— WINDOW struct of a previously opened window.
windows is activated and the screen is updated. If
FALSE then no other window is activated and the
screen is not updated.
/* no screen update */
Not for Distribution Beta Version January 26, 2001