St_Angle - Texas Instruments TI-89 Developer's Manual

Appendix A: System Routines — Status Line

ST_angle

Declaration: void ST_angle (UINT indic )
Category(ies): Status Line
Description: Sets the angle status line indicator.
Inputs: indic — ST_RAD, set status angle display to "RAD".
Outputs: None
Assumptions: This routine does not set or change the angle mode setting — it only
updates the status line display. Use MO_digestOptions to change the
angle mode setting and the angle status indicator will be updated
automatically.
Side Effects: None
Availability: All versions of the TI-89 / TI-92 Plus.
TI-89 / TI-92 Plus
None
Differences:
See Also: MO_digestOptions
Example:
ST_angle(ST_RAD);
TI-89 / TI-92 Plus Developer Guide
ST_DEG, set status angle display to "DEG".
Not for Distribution
961
Beta Version January 26, 2001