St_Readonly - Texas Instruments TI-89 Developer's Manual

970

ST_readOnly

Declaration: void ST_readOnly (UINT indic )
Category(ies): Status Line
Description: Sets the read-only status line indicator.
Inputs: indic
Outputs: None
Assumptions: This routine does not set or change the read-only state of the text currently
being edited — it only updates the status line display. Use
TE_indicateReadOnly to test the read-only state of the current text edit
record and turn on the read-only status line indicator automatically.
Side Effects: None
Availability: All versions of the TI-89 / TI-92 Plus.
TI-89 / TI-92 Plus
None
Differences:
See Also: TE_indicateReadOnly
Example:
TE_open(&teRec,&window,NULL,hText,0,0,TE_READ_ONLY|TE_WRAP); /* open read-only text */
TE_indicateReadOnly(&teRec);
.
.
.
ST_readOnly(ST_READONLY_OFF);
TI-89 / TI-92 Plus Developer Guide
Appendix A: System Routines — Status Line
— ST_READONLY_OFF, turns off the read-only indicator.
ST_READONLY_ON, turns on the read-only indicator.
/* turn on padlock and dim edit menus */
/* turn off padlock in status line */
Not for Distribution Beta Version January 26, 2001