Texas Instruments TI-89 Developer's Manual page 1105

Appendix A: System Routines — Text Editing
TE_open
(continued)
Inputs: (continued)
TI-89 / TI-92 Plus Developer Guide
0x0002 TE_COLON
Place colon (:) character at the beginning of each
line. Program editor uses this flag to mark the
beginning of each line of the program.
0x0006 TE_COMMANDS
Leave room for one character at the beginning of
each line for a command character. The Text Editor
application uses this flag.
NOTE: This flag is combined with the TE_COLON flag.
0x0008 TE_MORE_ARROWS
Set this flag to display arrows at the left and right
ends of a single line edit region to indicate when more
text is to the left or right of the edit region.
0x0018 TE_MORE_ELLIPSES
Set this flag to display ellipses ( . . . ) at the left and
right ends of a single line edit region to indicate when
more text is to the left or right of the edit region.
0x0100 TE_CHANGED
Do not set this flag. It is a status flag which if 1
indicates the contents of the edit buffer have
changed.
0x0400 TE_AUTO_ANS
Set this flag to 1 to cause "ans(1)" to be inserted
automatically when the edit buffer is empty and an
arithmetic operation is typed.
0x0800 TE_READ_ONLY
Display text and allow arrow keys to navigate through
edit buffer, but do not allow changing the text.
The remaining bits are internal status flags or reserved for
future use.
(continued)
Not for Distribution
1063
Beta Version January 26, 2001