Cu_Cursorstate; Display - Texas Instruments TI-89 Developer's Manual

Appendix B: Global Variables — Display

CU_cursorState

Declaration: CU_STATE CU_cursorState
Category(ies): Display, Interrupts
Description: Holds the current state of the cursor, either CU_CURSOR_ON or
CU_CURSOR_OFF.
Do not fetch or modify the value of CU_cursorState directly. Use
CU_state and CU_restore to get and set the current cursor state, or
CU_start or CU_stop to start or stop cursor flash.
Inputs: Not applicable.
Outputs: Not applicable.
Assumptions: Access_AMS_Global_Variables must be defined.
Side Effects: Not applicable.
Availability: On AMS 2.00 and higher.
TI-89 / TI-92 Plus
Differences: None
See Also: CU_state, CU_restore, CU_start, CU_stop
Example:
CU_STATE cs = CU_state();
CU_stop()
.
. /* do something with cursor off */
.
CU_restore(cs);
TI-89 / TI-92 Plus Developer Guide
/* save cursor state */
/* turn off cursor */
/* restore cursor state */
Not for Distribution
1221
Beta Version January 26, 2001