Cmd_Newprob - Texas Instruments TI-89 Developer's Manual

1100

cmd_newprob

Declaration: void cmd_newprob (void)
Category(ies): Utilities
Description: Delete single letter variables a through z in the current folder, reset CAS
arbitrary real and integer variable number counters to zero, turn off
graphing of functions and data plots, then clear the graph screen, program
I/O screen, table screen, and Home screen, and reset the error state.
This routine implements the TI-BASIC NewProb command.
Inputs: None
Outputs: None
Assumptions: None
Side Effects: None
Availability: On AMS 1.05 and higher.
TI-89 / TI-92 Plus
Differences:
See Also: cmd_clrdraw, cmd_clrgraph, cmd_clrhome, cmd_clrio
Example:
cmd_newprob();
TI-89 / TI-92 Plus Developer Guide
Appendix A: System Routines — Utilities
Not for Distribution Beta Version January 26, 2001