Slot Numbering
Slot Numbering
For a stack of OmniSwitch 6450 switches to operate as a virtual chassis, each module in the stack must be
assigned a unique slot number. To view the current slot assignments for a stack, use the
module
commands. The slot number is also displayed on the front panel of each switch by the LED
located on the left side of the chassis (refer to
information).
There are two ways stacking modules are assigned slot numbers:
•
Dynamic slot number assignment by the system software
Manual slot number assignment by the user
•
page 5-20
"OmniSwitch 6450 LED Status" on page 2-32
OmniSwitch 6450 Hardware Users Guide
Managing OmniSwitch 6450 Stacks
show ni
or
for more
January 2015
show