Slot Numbering
Slot Numbering
For a stack of OmniSwitch 6250 Series switches to operate as a virtual chassis, each module in the stack
must be assigned a unique slot number. To view the current slot assignments for a stack, use the
or
show module
commands. The slot number is also displayed on the front panel of each switch by the
LED located on the left side of the chassis (refer to
There are two ways stacking modules are assigned slot numbers:
Dynamic slot number assignment by the system software
•
Manual slot number assignment by the user
•
page 6-20
Preliminary
Managing OmniSwitch 6250 Series Stacks
9/28/09
"Status LEDs" on page 2-54
OmniSwitch 6250 Series Hardware Users Guide
show ni
for more information).
September 2009