Slot Numbering - Alcatel-Lucent OmniSwitch 6250-24M User Manual

Slot Numbering

Slot Numbering
For a stack of OmniSwitch 6250 switches to operate as a virtual chassis, each module in the stack must be
assigned a unique slot number. To view the current slot assignments for a stack, use the
module commands. The slot number is also displayed on the front panel of each switch by the LED
located on the left side of the chassis (refer to
There are two ways stacking modules are assigned slot numbers:
•
Dynamic slot number assignment by the system software
•
Manual slot number assignment by the user
page 6-20
"LED Status" on page 2-20
OmniSwitch 6250 Hardware Users Guide
Managing OmniSwitch 6250 Stacks
show ni or
for more information).
June 2012
show