Slot Numbering - Alcatel-Lucent OmniSwitch 6400 Series Hardware User's Manual

Slot Numbering

Slot Numbering
For a stack of OmniSwitch 6400 Series switches to operate as a virtual chassis, each module in the stack
must be assigned a unique slot number. To view the current slot assignments for a stack, use the
or show module commands. The slot number is also displayed on the front panel of each switch by the
LED located on the left side of the chassis (refer to
mation).
There are two ways stacking modules are assigned slot numbers:
Dynamic slot number assignment by the system software
•
Manual slot number assignment by the user
•
page 6-18
Managing OmniSwitch 6400 Series Stacks
"LED Status Indicators" on page 2-20
OmniSwitch 6400 Series Hardware Users Guide
show ni
for more infor-
August 2008