Before Igniting; Choose A Proper Location To Cook; Preparing Barbecue For First Time - Weber SmokeFire EX4 Owner's Manual

Wood pellet barbecue
Hide thumbs Also See for SmokeFire EX4:
Table of Contents

Advertisement

BEFORE IGNITING

Choose A Proper Location To Cook

In order to ensure a safe and enjoyable barbecuing experience, it is important
to remember these rules when choosing a location for your WEBER
SMOKEFIRE:
• Do not use indoors! This barbecue is designed for outdoor use in a well-
ventilated area and is not intended for and should never be used as a heater.
If used indoors, toxic fumes will accumulate and cause serious bodily injury
or death.
• Do not use in a garage, building, breezeway, tent, or any other enclosed area.
• Do not use this barbecue within 65cm (2 feet) of any combustible material.
Combustible materials include, but are not limited to, wood or treated wood
decks, patios, and porches.
• Keep the cooking area clear of flammable vapour and liquids, such as petrol,
alcohol, etc.
• Do not use this barbecue under any overhead combustible construction
including ceilings, overhangs, a lanai or screened in porch.
• Do not use the barbecue within 3m (10 feet) of any body of water, such as a
pool or pond.
• Do not use the barbecue in a confined and/or habitable space e.g. houses, tents,
caravans, motor homes, boats. Danger of carbon monoxide poisoning fatality.
• Always store WEBER SMOKEFIRE ALL NATURAL HARDWOOD PELLETS in a
dry place located away from heat-producing appliances and moisture.
Preparing Barbecue For First Time Startup
Before the first startup of your WEBER SMOKEFIRE barbecue, there are some
necessary steps to be followed:
1. Remove all packaging materials from the barbecue.
2. Open the barbecue lid and make sure the heat baffle, heat diffuser,
FLAVORIZER BARS and cooking grates are properly installed inside the
cookbox (A).
3. Plug the power cord into the bottom of the hopper before plugging it
into a grounded electrical outlet.With the power supply switch in the off
position, plug your barbecue into a grounded outlet (B).
4. Open the hopper lid and check the bottom inside of the hopper to ensure
there are no foreign objects obstructing the auger and that the hopper
finger safety guard is in place. (C).
NOTE: Make sure the hopper slide door is closed before filling the hopper with
pellets.
5. Fill the hopper with your choice of WEBER SMOKEFIRE ALL NATURAL
HARDWOOD PELLETS (D). Close the hopper lid when filled.
6. Turn the power supply switch, located on the bottom of the hopper, to the
on position (E).
A
8
B
C
D
E

Advertisement

Table of Contents
loading

This manual is also suitable for:

Smokefire ex6

Table of Contents