Weber SmokeFire EX4 Owner's Manual page 30

TROUBLESHOOTING
Symptom
Barbecue will not power on
Inside of barbecue lid appears to have
peeling paint
CALL
CUSTOMER
SERVICE
If you are still experiencing any
problems, contact the Customer
Service Representative in your area
using the contact information
on weber.com.
30
If the barbecue will not power on:
1. Check that the power cord is securely plugged into the barbecue and into a power
source.
2. If your barbecue is using a domestic plug socket, check the fuse box and reset the
RCD if necessary.
3. If the barbecue will still not power on after you have completed the above checks, it
is likely that the fuse has blown. See the following instructions on how to replace the
barbecue's fuse.
4. If the barbecue will not power on after all steps have been followed, contact the
Customer Service Representative in your area using the contact information on our
website.
The flakes you see are accumulated cooking vapours that have turned into carbon. This
happens over time after repeated use of your barbecue. This is not a defect.
Using a barbecue brush or the barbecue scraper included, gently scrub and clean the
carbon flakes off the lid and cookbox. Wipe clean with a soft cloth or paper towel.
REPLACEMENT
PARTS
To obtain replacement parts,
contact the local retailer in
your area or log onto
weber.com.
Cause / Actions